From water and home heating to cooking and clothes drying, propane provides essential energy solutions to help you save money and lower your carbon footprint.
View fact sheets and brochures filled with useful information about propane and the propane industry.
Propane is used daily by hundreds of thousands of Canadians from coast to coast to coast, from heating homes, drying crops, powering forklifts to transporting children to school.
The health and safety of customers and employees are vital to the propane industry.
Have a question about propane? Check out our list of frequently asked questions, because chances are it’s probably been asked before!
Warm weather means more backyard BBQs! Check out our tips to ensure you are operating your BBQ safely.
Get the latest news on important issues for the propane industry.
September 2024
The corrected version of the Model Database was published on August 8, 2024.
Please note that the corrections only impact the modelling of biogas and renewable natural gas (RNG) pathways, or fuel pathways that use biogas or RNG as an input or feedstock.
These corrections have no impact on the Specifications for Fuel LCA Model CI Calculations, and the CFR Data Workbook published on June 28, 2024.
Under the Clean Fuel Regulations, applicants must use the most recent versions of the Fuel LCA Model (August 2024 database), Specifications and CFR Data Workbook when submitting an application for the approval of a CI determined using the model.
However, for fuel pathways not involving biogas or RNG that were modelled but a CI application was not submitted prior to this August 8 publication, the modelling with the June 2024 database may be used to submit that CI application, though using the August 2024 database is recommended. Please note that any modelling of biogas or RNG using the June 2024 database will not be approved.
For questions, contact the Low Carbon Fuels Division, Environment and Climate Change Canada.
ECCC is aware of the discrepancy between the Schedule 5 submission deadline displayed on the E2 Regulations, 2019 Online Reporting System (E2 database) dashboard and that in the Schedule 5 submission reminder e-mail received by some facilities:
Note that the provisions of the Environmental Emergency Regulations, 2019 (the regulations) require that the Schedule 5 – Notice Regarding Simulation Exercises Conducted in Relation to an Environmental Emergency Plan be submitted within 5 years after the day on which the environmental emergency (E2) plan is brought into effect, and every 5 years after the submission of the Schedule 5 notice. The email reminders had reflected this date correctly, but the E2 application dashboard listed a date that is one year later.
Although it remains your obligation to comply with the regulations, we acknowledge that the incorrect date displayed on the dashboard may have caused confusion. To address this, we have advised Environment and Climate Change Canada enforcement staff of the issue so that they may take this into consideration when determining the appropriate response to any alleged non-compliance with this requirement.
TDG has created the following Client Identification Database videos for further clarification.
CID Video – Presentation on Part 17: An explanation of why Part 17 – Site Registration Requirements and the associated registration platform (Client Identification Database) have been created. It also gives further details on the definition of a site and the exemptions related to the registration. This video will help you determine if you must register your site(s).
CID Point and Click Video: A no-audio demonstration of the registration process in the platform.
For any questions, contact the TDG Safety Awareness Team.
Transport Canada would like to remind you that an external inspection must always be done before a pressure test. Reclosing pressure relief devices must be tested or replaced.
Pressure test – B620 Clause 7.2.7
The purpose of pressure tests is to ensure a tank can withstand the stress of normal operations by applying a high pressure under controlled conditions to demonstrate the safety and integrity of the tank.
Because of the risks involved in pressurizing the tank above its maximum allowable working pressure, it’s important to take precautions to protect people in the test area. Pressure test mediums are more restricted than leakage test mediums.
Leakage test – B620 Clause 7.2.5
The purpose of leakage tests is to check each valve, gasket, and any other closures on a tank and within the piping to ensure they are all in good condition and leak tight. Leakage testing involves pressurizing the tank to a pressure below its maximum allowable working pressure. The main pressure relief valves must be in place and working during the test.
The order of the leakage test is important. Each valve and closure must be tested in sequence, up to and including the valve furthest from the tank.
For questions, please contact TC at: MOCRegister-Registrecontenant@tc.gc.ca.
Technical Safety BC received mixed feedback on its Design Registration fee changes consultation. Eighty-one participants responded to the TSBC questionnaire. Some considered the increase substantial and requested further justification, particularly considering market conditions and TSBC’s current service levels. Others, however, were satisfied with the improvements in its services. Read the report. For any questions, email engage@technicalsafetybc.ca.
In Technical Safety BC’s efforts to prevent unlicensed work in B.C., it has developed a digital badge to be used on all advertising material that will distinguish licensed contractors from unlicensed ones. The digital badge is editable, allowing contractors to add their licence number. It can be downloaded and used on all branding materials, from vehicles to websites. Visit the TSBC web page – Advertising Guidelines for Licensed Contractors for more details and conditions for use.
The following STANDATA is now available on the Alberta.ca website
To view all Gas STANDATA click here. For any questions, email: safety.services@gov.ab.ca.
The Ontario government has made an additional $260 million available through its Skills Development Fund for in-demand sectors such as manufacturing, construction and technology. If you are interested in applying for funding for training, go to Transfer Payment Ontario. Applications will be reviewed on an ongoing basis until October 4, 2024.
The fund has two streams: the Training Stream supports hiring, training, and upskilling programs for jobseekers, apprentices, and workers; and the Capital Stream supports upgrades or construction of training centres for the skilled trades.
Inquiries on how to apply to the SDF Training Stream should be addressed to skillsdevelopmentfund@ontario.ca.
Atlantic Committee Meeting In-person Meeting Date: September 25, 2024 Time: 8:30 am – 11:30 am AT Location: Four Points by Sheraton Moncton 40 Lady Ada Blvd. Moncton, NB E1G 0E8 Click here for more details
Saskatchewan Committee Meeting Virtual Meeting Date: November 13, 2024 Time: 9:00 am – 10:30 am CT
Alberta Committee Meeting Virtual Meeting Date: January 9, 2024 Time: 9:00 am – 10:30 am MT
.
